null  
phone: 270-618-5200

New WSM / Chrysler & Force 1995-1999 70/90 HP 3-CYL Powerhead Rebuild Kit

$772.88
No reviews yet Write a Review
Shipping:
Free Shipping

Featuring all the parts needed to effectively rebuild an outboard powerhead in one convenient package, our powerhead rebuild kits offer a combination of cast WSM Pistons complete with Japanese rings, pins, and clips, the highest quality gaskets available, and the necessary crank bearings, rod bearings, and rod bolts. These kits are available with Standard-Size Pistons or .010/.020/.030/.040 Oversize Pistons, so please specify when placing an order.

This rebuild kit is designed for use with Chrysler/Force 70 HP 3-Cylinder Powerheads from 1999 and 90 HP 3-Cylinder Powerheads from 1995 to 1999; this kit fits Top-Guided Models with a 3.375" Bore Size. [Note: Bottom-Guided 2/3/4/5-CYL Models having Forging Numbers 335016-3 or 600-818052, while Top-Guided 2/3/4-CYL Models have a Forging Number of 640-9612]. The kit includes the following:

Three Pistons [Complete with rings, pins, and clips]

100-210k.jpg

One Gasket Kit [including 1 Head Gasket, 1 Upper Base Gasket, 1 Lower Base Gasket, 3 Port Cover Gaskets, 3 Carburetor Gaskets, 4 Reed Block Gaskets, 1 Thermostat Gasket, 1 Thermostat Seal, 2 Exhaust Gaskets, 1 Crankcase Gasket, 1 Upper Crank Seal, and 1 Lower Crank Seal]

500-107.jpg

Main Bearings [One Lower, Two Center, and One Upper]

010-258.jpg010-281.jpg010-206-01.jpg

Rod Bearings [Three Upper and Three Lower]

010-134-26.jpg010-138.jpg

 

Six Rod Bolts

805-200.jpg

SHIPPING: Additional shipping fees to Alaska, Hawaii, US Territories, or International Shipping will be calculated after checkout. You will receive an email and a PayPal money request for the additional shipping charges at the email address provided. (Some items are excluded from international shipping)

If you have any questions, please contact us through e-mail at customerservice@marinepartswarehouse.com. Please provide your engine model number to help confirm compatibility.