Featuring all the parts needed to effectively rebuild an outboard powerhead in one convenient package, our powerhead rebuild kits offer a combination of cast WSM Pistons complete with Japanese rings, pins, and clips, the highest quality gaskets available, and the necessary crank bearings, rod bearings, and rod bolts. These kits are available with Standard-Size Pistons or .015/.020/.030/.040 Oversize Pistons, so please specify when placing an order.
This rebuild kit is designed for use with Mercury/Mariner 2004 & Up 75/90/115 HP 3-Cylinder 1.5L DFI/Optimax Outboard Powerheads with a 3.6255" Bore Size.
Three Pistons [Complete with rings, pins, and clips]
One Gasket Kit [including 1 Base Gasket, 1 Air Box Gasket, 1 Intake Manifold Gasket, 3 Reed Gaskets, 2 End Cap O-Rings, 1 Fuel Pump Gasket, 2 Thermostat Gaskets, 2 Case Half O-Rings, 1 Upper Oil Seal, and 1 Lower Oil Seal]
Three Wrist Pin Needles
Main Bearings [One Upper, Two Center, and One Lower]
Three Lower Rod Bearings
Six Rod Bolts
SHIPPING: Additional shipping fees to Alaska, Hawaii, US Territories, or International Shipping will be calculated after checkout. You will receive an email and a PayPal money request for the additional shipping charges at the email address provided. (Some items are excluded from international shipping)
If you have any questions, please contact us through e-mail at customerservice@marinepartswarehouse.com. Please provide your engine model number to help confirm compatibility.
