Product Description
Featuring all the parts needed to effectively rebuild an outboard powerhead in one convenient package, our powerhead rebuild kits offer a combination of cast WSM Pistons complete with Japanese rings, pins, and clips, the highest quality gaskets available, and the necessary crank bearings, rod bearings, and rod bolts. These kits are available with Standard-Size Pistons or .020/.030/.040 Oversize Pistons, so please specify when placing an order. (Please note the photo for this kit is a stock photo and may not show the correct items. Please see below for contents)
This rebuild kit is designed for use with Johnson/Evinrude 75-90 HP 3-Cylinder ETec Powerheads from 2004 to 2017 with a 3.6000" Bore Size. The kit includes the following:
Three Pistons [Complete with rings, pins, and clips]
One Gasket Kit [including 3 Head O-Rings, 1 Base Gasket, 3 Injector Kits, 3 Reed Gaskets, 1 Throttle body to Reed Plate, 1 Exhaust Gasket, 1 Upper Crank Oil Seal, 1 Lower Crank Oil Seal, 1 Lower End Cap O-Ring, 1 Valve O-Ring, 1 Thermostat Cover O-Ring, 1 O-Ring, 1 Rubber Washer, 1 Air Temp Sensor Gasket, 1 Thermo Seal, and 1 Plunger to Crank Case Grommet]
Main Bearings [One Upper, One Center, and One Lower]
Rod Bearings [Two Upper and Two Lower]
Four Rod Bolts
NOTE: All of these items are available for individual sale, but are not necessarily listed on this website. Please email us or fill out the form below for pricing and availability.
This item is eligible for Free Shipping to locations in the Lower 48. Increased fees will apply for Alaska, Hawaii, US Territories, and International Shipping. Shipments to Kentucky will be charged 6% KY sales tax.
If you have any questions, please contact us through e-mail at obparts+cs@gmail.com. To ensure that the proper product is ordered, please provide your motor's model number.